Anyone knowing Sony Digicams?

HomeForumsBrickfilming ForumsHardware and SoftwareAnyone knowing Sony Digicams?

This topic has 1 voice, contains 3 replies, and was last updated by Avatar of Hansch Hansch 4137 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
Author Posts
Author Posts
May 5, 2003 at 5:41 pm #2292
Avatar of Hansch
Hansch

Hi,
I got a Sony DCR-PC1E. I already worked a lot with the Sony Digicam, but I don’t know how to change it and I already looked in the manual for this problem.
When I go to “Camera” mode and I do for about 5 minutes nothing with the camera (pressing REC, etc.) to save energy, bla bla bla…
But for Stop Motion movies it doesn’t need the battery and I capture the frames on the PC, so I always have to switch the camera on after 5 minutes and programs like Dodcap, loose the connection to the camera and they stop the “capture session”?!?

Thanks!

May 5, 2003 at 5:48 pm #2293
Avatar of Stefan
Stefan

Some people have suggested leaving the tray for the tape open. That would prevent it from powering off.

Stefan.

May 5, 2003 at 8:59 pm #2304
Avatar of LowweeK
LowweeK

Absolutely : you can close the tape tray BUT don’t put a tape in it !
With no DV cassette, all right ! It won’t shut off…

May 5, 2003 at 9:19 pm #2306
Avatar of Hansch
Hansch

Thank you, it worked, I also had to switch the “Demo mode” off.
This will make my “work” much easier.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.