Camera problem -.-

HomeForumsBrickfilming ForumsHardware and SoftwareCamera problem -.-

This topic has 1 voice, contains 7 replies, and was last updated by Avatar of Superbanzai Superbanzai 1329 days ago.

Viewing 8 posts - 1 through 8 (of 8 total)
Author Posts
Author Posts
April 1, 2011 at 6:52 pm #412656
Avatar of warba98
warba98

Hi, I got a question for y’all.

I’m new to this (hehe xD) but I’m really excited about brickfilming (I already did this sometimes with a friend and really want to continue. But… I don’t got a webcam and I do not want one (bad quality. I do got a camera! I’d like to make movies with that camera but taking the pictures on the camera itself and then putting it on a computer is NOT POSSIBLE :’(
I would like to maybe connect the camera to the computer or something to work with Anasazi SMA… HOW SHOULD I DO THIS??
Please help!

Thank you,

Me (lol xD)

April 1, 2011 at 11:16 pm #412662
Avatar of Superbanzai
Superbanzai

What camera do you have?

April 2, 2011 at 10:51 am #412664
Avatar of warba98
warba98

Well, it’s a Medion LIFE X47000

April 2, 2011 at 3:58 pm #412665
Avatar of Superbanzai
Superbanzai

Well, if it can capture one frame at a time, and has a USB cable you should be fine. :wink . Otherwise I don’t know what you should do. If you have some money, you could just buy a Sony Camera.

April 2, 2011 at 4:10 pm #412666
Avatar of warba98
warba98

And if I got a Sony camera, what then? xD
I got a friend who’s got one…

April 3, 2011 at 2:37 pm #412668
Avatar of Superbanzai
Superbanzai

Then you could hook up its USB cable to the computer. Most Sony cameras have one. If not I don’t know what to say, just Google your problems or go over the instruction manual another time. Good luck! :D

April 3, 2011 at 4:55 pm #412669
Avatar of warba98
warba98

Ok, thanks… But doesn’t it comes into a sort of USB mode?

April 4, 2011 at 12:12 am #412671
Avatar of Superbanzai
Superbanzai

As long as Anaszi can take the pictures from the camera, you’re good.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.