Cesta do práce-Back to work [TEST Film]

HomeForumsPrivate: Special ForumsThe Lively Discussion ForumCesta do práce-Back to work [TEST Film]

This topic has 0 voices, contains 2 replies, and was last updated by Avatar of eetthha eetthha 1105 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
August 19, 2011 at 11:56 am #413230
Avatar of eetthha
eetthha

My first brickfilm. I used Sony Vegas 9 and Canon PowerShot D10 for camera.

http://www.youtube.com/watch?v=0p5uWeHGbI0

Note: The minifilm is in czech language. I will do an czech-english films ASAP.[/url]

August 19, 2011 at 12:54 pm #413233
Avatar of kharaku
kharaku

Quite good for a first film, I’d reccomend a couple of things.

First of all you need to secure you’re camera into a fixed position, you could probably use a tri-pod for that, and also the set needs securing if it already isn’t, an effective method is to tack the bottom of the baseplate onto your desk.

Secondly your minifigure walk cycle isn’t bad but I’d reccomend you read this article to improve it:

http://brickfilms.com/resources/view.php?id=12

August 20, 2011 at 6:05 pm #413245
Avatar of eetthha
eetthha

Quite good for a first film, I’d reccomend a couple of things.

First of all you need to secure you’re camera into a fixed position, you could probably use a tri-pod for that, and also the set needs securing if it already isn’t, an effective method is to tack the bottom of the baseplate onto your desk.

Secondly your minifigure walk cycle isn’t bad but I’d reccomend you read this article to improve it:

http://brickfilms.com/resources/view.php?id=12

Thanks for simple walk tutorial. I need this for next films… :)

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.