My Blue Screening Test!!!

HomeForumsBrickfilming ForumsAnimation and EffectsMy Blue Screening Test!!!

This topic has 1 voice, contains 7 replies, and was last updated by Avatar of Firelance Firelance 4296 days ago.

Viewing 8 posts - 1 through 8 (of 8 total)
Author Posts
Author Posts
April 22, 2003 at 2:45 am #1302
Avatar of titantiger

I was working with bsol , and i came up with this , its not as good as it could of been , but im learning in time for Lego Survivor!

April 22, 2003 at 3:12 am #1304
Avatar of legotronn

Titan, your link is not yet public.

Here’s how to put up your link:

Click into your link while logged in and copy the link above.


P.S. Eager to see bluescreen test. :)

April 22, 2003 at 3:34 am #1305
Avatar of titantiger
titantiger … lness1.jpg

that should work!!! if doesn’t post again. Mind you , its not that good… :)

April 22, 2003 at 12:10 pm #1313
Avatar of ComedyDude

pretty cool I can’t see anything bad :)

April 22, 2003 at 2:54 pm #1316
Avatar of strongest of the weak
strongest of the weak

I don’t see why you think it is bad. The colors of the lego really could never match the color scheme of the real world ao it will always look weird. Good job.

April 22, 2003 at 9:21 pm #1326
Avatar of T

The hands are cut off, and the edges looks like BSOL had hunger.
I guess your figs were too close agains the backdrop and the lighting was completly wrong.
looking at the figs I see some blue clour reflection on them.
For the next time try to reduce all reflections on the fig to minumum, like their are no reflections.
Keep you figs far from the backdrop and make sure the focus is very sharp on the figure and blurry on the screen.

For your lighting setup try next time use three lamps two with yellow light one on the front (make sure that tihs one don’t thouch the screen) and the second from the back.
This will cut off the fig from the screen and create a depth in the picture and also create a edge which will make keying much easier.

The third lamp with a light blue filter on the from you target on the blue screen. You need to amplify the colour blue of the screen by osing this lamp. Now blue will look like it’s blue for your cam. But be very carefull with this light source, this one may not hit any of the object in the scene.

btw for more chroma key information just watch “Making of…. my new movie..)” soon on-line

April 23, 2003 at 3:47 am #1354
Avatar of titantiger

I will try again , thanks for commenting!!!

April 24, 2003 at 7:45 pm #1447
Avatar of Firelance

Just try to get your bluscreen lighted from the back, so that there’s a very clear blue and so bsol will give you sharper results… Also beware of the cuttof… But I guess that’s Premiere :P

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.